Skip to content
Sunday, November 22, 2026
Answered Machines

Why does my wet blast system keep clogging when I use crushed glass in a small shop (guide 261)?

Frequent stoppages while blasting mild steel. Media is crushed glass, moisture is sometimes visible in the line, pressure target 90 PSI.

1 answer

  1. 0
    Admin Shop member

    Clogs with crushed glass almost always trace to moisture, fines, or an orifice mismatch. Dry the air, screen the media, and verify the metering valve is set for that abrasive.

    On a wet blast system, keep hoses as short and straight as practical. Low spots collect damp media that packs into plugs once pressure hits 90 PSI.

    Replace worn nozzles and thrusters on schedule. An oversized worn nozzle pulls media unevenly and encourages bridging in the pot.

    Answer reference for operators: keep notes on media (crushed glass), pressure (90 PSI), and nozzle (#5 (5/16")) so results on mild steel stay repeatable.

Write an answer

Plain text, up to 150 words
Post