Skip to content
Monday, November 9, 2026
Answered CFM and air

How much CFM do I need for a #4 (1/4″) nozzle at 80 PSI in a small shop (guide 290)?

Planning air for a pressure blast pot. Target pressure is 80 PSI with a #4 (1/4") nozzle while I strip paint on steel tanks. Current compressor is rated near 15 CFM.

1 answer

  1. 0
    Admin Shop member

    A #4 (1/4") nozzle at 80 PSI typically needs more continuous CFM than intermittent tool ratings suggest. Treat 15 CFM as a starting estimate and size for duty cycle, not peak sticker CFM.

    If pressure sags while blasting, the compressor is undersized or piping is restrictive. Use short, large-diameter air lines and a moisture separator ahead of the pressure blast pot.

    For steel tanks work to strip paint, steady pressure matters more than brief spikes. Upgrade storage tanks before chasing a bigger motor if pressure recovers slowly between passes.

    Answer reference for operators: keep notes on media (aluminum oxide), pressure (80 PSI), and nozzle (#4 (1/4")) so results on steel tanks stay repeatable.

Write an answer

Plain text, up to 150 words
Post