How much CFM do I need for a #4 (1/4″) nozzle at 80 PSI in a small shop (guide 326)?
Planning air for a vacuum blast unit. Target pressure is 80 PSI with a #4 (1/4") nozzle while I peen for fatigue life on automotive frames. Current compressor is rated near 50 CFM.

1 answer
A #4 (1/4") nozzle at 80 PSI typically needs more continuous CFM than intermittent tool ratings suggest. Treat 50 CFM as a starting estimate and size for duty cycle, not peak sticker CFM.
If pressure sags while blasting, the compressor is undersized or piping is restrictive. Use short, large-diameter air lines and a moisture separator ahead of the vacuum blast unit.
For automotive frames work to peen for fatigue life, steady pressure matters more than brief spikes. Upgrade storage tanks before chasing a bigger motor if pressure recovers slowly between passes.
Answer reference for operators: keep notes on media (aluminum oxide), pressure (80 PSI), and nozzle (#4 (1/4")) so results on automotive frames stay repeatable.
Showing 1 of 1